Service & Support

How to get the most out of your LED screen?

Do you concentrate on your LED Screen? If you want to get the most out of your LED screen wall (and your customers), in terms of recognition from the audience, we will help you determine the best approach for creating a new ad.

Here we go with a few tips that might be useful for you (or your designer), when creating the next advertising to be broadcast on your LED screen wall. If you want to get the most out of your LED screen wall (and your customers), in terms of recognition from the audience, we will help you determine the best approach for creating a new ad.

First of all, let’s address the ad duration. Some people make the huge mistake of creating 30 to 40 seconds ads. 30 seconds? Your audience is not sitting on a sofa waiting for the next TV show! They are most probably driving by at 45 miles per hour and hopefully they are more focused on the street rather than your LED Screen.

Still, they should be able to see the entire ads, from start to end while passing by. So what’s the point of creating a wonderful ad, if they can’t read the advertiser’s phone number and address at the end because the ad is too long? From my experience an ad should be a maximum of 10 seconds in length, and rarely 15 seconds.

Longer ads are pointless because either your target sees the beginning and not the end, or vice-versa. In both cases, you didn’t get the message across, and the audience did not find an interesting message on your LED wall. Therefore your customer will have no interest in doing it again in the future because they didn’t get much in return for their investment.

Of course, there are exceptions to the “10 second” rule, such as when LED Screen walls are installed in pedestrian areas where people have more time to watch the LED screen wall. But as I said, those are exceptions and are rare.

LED displays Technical Index

(1) Display screen is 1/8scan

The datas transmitted by the single net line introduced from the front controlling card are 768 * 160pixel, 1024 grades gray. The rear full color HUB PANEL at the update rate of 180 Hz each can control 256 * 160pixel, at the update rate of 360 Hz, each can control 128 * 160 pixel. Certain HUB Panels can be conducted cascading . according to requirements.

(2) Display screen is 1/4 scan

When the update rate is 180 Hz, every full color HUB Panel can control 384 * 80 pixel;when update rate is 240 Hz, every panel can control 256 * 80pixel;at the update rate of 480 Hz, each can control 128 * 80pixel. Among HUB Panels can conduct cascading.

HUB PANEL cascading, can be stated as the following: every full color HUB Panel have 2 groups of RJ-45 connecting port, every group has 2 connecting ports, 1 in and 1 out, altogether 4 connecting ports. Usually, only jointing 1 group RJ-45, at this time, the cascading among HUB Panels is series connection. If joint 2 group RJ-45, cascading has two modes (1) 1 in 2 out, HUB Panels can be series connection and parallel connection, when there are many HUB Panels in the system, the mode can ensure the completeness of signal transmission; (2)2 in 2 out, this mode is 2 sets of main controlling system to control 1pc LED display screen, in the front, there are 2 ABSEN 2002 main controlling cards to individually transmit two different sets of data, full color HUB PANEL judge the priority. The corresponding display screen position of the pixel which controlLED by every cascading HUB Panel is decided by the the No. 7 & 8 digits of the numeral dialing tray which be instalLED on the Hub Panel.